SPONSORS
2024 ICRBE EXPO |
Symbol Alignment
Posted by:
Tom Kirkman
(Moderator)
Date: December 08, 2009 11:22AM
I want to thank those of you who have sent photos of yourself along with the International Custom Rod Building Symbol. Hopefully, the photos will continue to arrive. The more I get the better the outcome of the project I'm preparing for the Expo will be. Even if you're not coming to the Expo, I'd welcome a photo of you, your shop, boat, etc., with the symbol. Just make sure you're in the photo.
One thing I've noticed, and I do get questions on this from time to time, is how the symbol is supposed to be oriented. Well, you can position it however you want, but for the sake of consistency I added an alignment mark to the image. If you look at the inside circle border, near the top you'll see a small, thin, very short line extending downward from that point (look at the upper right hand side of your computer screen right now to see the image and that line I just mentioned). If you orient the decal so that this line is vertical, you will have the symbol oriented in the manner which it was designed to be postitioned. Again, you can orient it any way you like, but with the alignment line positioned vertically, you'll have it the way it was originally designed to be used. ............. Re: Symbol Alignment
Posted by:
Ron Asker
(---.lew.clearwire-dns.net)
Date: December 08, 2009 03:32PM
HAHA I thought that was dust on my monitor. Sorry, only registered users may post in this forum.
|