SPONSORS
2024 ICRBE EXPO |
SE#3
Posted by:
Tom Kirkman
(Moderator)
Date: November 23, 2009 02:08PM
The final 2009 CD in the RodMaker Special Edition Series will be ready this coming Friday. It focuses on specialty rod building tools, fixtures, shops, etc. It sells for $29.95 and can be ordered via mail by check or via paypal. There is a limited number of CDs being prepared. If there are any left after the initial orders I will put them on the RodMaker website. I expect there will be some on the website in about 2 to 3 weeks. In the meantime, a check or money order or PayPal payment for $29.95 will get you a copy. Specify that you want the RodMaker “Special Edition #3 - Tools, Fixtures & Shops†and I’ll get your copy mailed out next weekend, postpaid.
The new CD is the largest to date - it includes 30 topics and is over 100 pages long. It includes articles from past issues of RodMaker Magazine, plus a few topics that have never appeared in print previously. This will be the last Special Edition CD until next Summer. Special Edition #3 - Tools, Fixtures & Shops Ferrule Disassembly Tool Mobile Rod Building Workstation Rod Shop Tours #1 Rod Shop Tours #2 A Custom, Custom Rod Shop CCS Data Board Fixture Make Your Own Weaving Jig Reverse Pilot Point Bits Sandpaper Trimmer Mobile Lathe Stand Shop Clamps Thread Tools You Can Make A vertical Cork Lathe Mechanical Epoxy Mixer Making Tapered Reamers Self-Centering Cork Drilling Clamp Building a HomeBrew Spine Finder Long Foot Control Board Hand Rod Wrapping Jig Plans Motorized Power Wrapper Plans Drying Unit for the Renzetti Lathe Interior Water Break Free Tool Lathe Height Adjustment Tool Home Made Custom Rod Lathe Spiral Wrap Demo Device A Quick Rod Wrapping Bench Cork Cutting Jig Center Marking Tool Mobile Lathe/Accessory Bench Precision Turning Mandrels Blank Holding Fixture ................ Re: SE#3
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: November 23, 2009 05:00PM
Paypal address? Re: SE#3
Posted by:
Tom Kirkman
(Moderator)
Date: November 23, 2009 05:03PM
Sorry, it's my email address - rodmaker@earthlink.net. Re: SE#3
Posted by:
John Lubben
(---.static.gci.net)
Date: November 23, 2009 06:47PM
Ordered one as well! Re: SE#3
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: November 24, 2009 01:46PM
Tom; Paypal does not like that address Re: SE#3
Posted by:
Tom Kirkman
(Moderator)
Date: November 24, 2009 01:50PM
Make sure you're entering it correctly. Others are using it and having no problem.
............. Re: SE#3
Posted by:
Robert A. Guist
(---.nmci.navy.mil)
Date: November 25, 2009 08:32AM
Hi Tom
Check's (money order) in the mail. Thanks. Bob Guist. Sorry, only registered users may post in this forum.
|