SPONSORS
2024 ICRBE EXPO |
Painted Letteirng
Posted by:
Mark Marshall
(---.dhcp.jcsn.tn.charter.com)
Date: November 14, 2009 09:41PM
I am consideirng using acrylic paint for labeling a Baston RX8 rod. How do you think the acrylic will react with FC or TM finish? Your thoughts.... Re: Painted Letteirng
Posted by:
Tom Kirkman
(Moderator)
Date: November 14, 2009 09:57PM
If it's dry, there should be no problem. Epoxies don't contain solvents. But try it on a scrap piece of blank just the same. Worst case scenario is that you'll have to seal it with some CP or a fixative spray.
.................. Re: Painted Lettering
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: November 14, 2009 10:42PM
I had an artist hand paint a fish character on a rod for me. I failed to ask it was
acrylic, water, or oil based paint but he told me the finish would not lift the paint and he was right. Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Painted Letteirng
Posted by:
Kerry Hansen
(---.proxy.aol.com)
Date: November 15, 2009 03:03PM
I just used some on a new Fly rod and to not take any chances I gave it a light spray of Krylon Fixative before I put on the finish. Worked great.
Kerry Sorry, only registered users may post in this forum.
|