I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Rm SE #2
Posted by: Heath Boeddeker (---.runestone.stellarllc.net)
Date: November 03, 2009 12:16PM

Howdy Tom and All ,

Just received my Copies of the SE #2 . But it seems I don't have the right program to open it or I got bad copies .I'm really leaning toward the missing program . Could Somebody please tell me which program I need to get to veiw the wealth of information on the SE # 2 disk ?

Thank you in advance ,
Heath

Options: ReplyQuote
Re: Rm SE #2
Posted by: Tom Kirkman (Moderator)
Date: November 03, 2009 12:28PM

It's a PDF file. Do you have Adobe Acrobat Reader? You can get it free for download.

.............

Options: ReplyQuote
Re: Rm SE #2
Posted by: Heath Boeddeker (---.runestone.stellarllc.net)
Date: November 03, 2009 12:31PM

Howdy Tom ,

Yes I do Tom. When I try to open the DIsks my computer says that they might be corrupted .I wil try them Both on my another computer to make sure it isn't a problem with my Laptop . And let you know if that works Tom.

Thank you for the speedy responce ,
Heath

Options: ReplyQuote
Re: Rm SE #2
Posted by: Tom Kirkman (Moderator)
Date: November 03, 2009 12:36PM

Let me know. It's rare that I get a bad one, but it could certainly happen.

If you have more than one CD, and neither works, it points more to a problem on your end than with the CDs.

..............

Options: ReplyQuote
Re: Rm SE #2
Posted by: Heath Boeddeker (---.runestone.stellarllc.net)
Date: November 03, 2009 12:53PM

Howdy Tom,

It is a Problem with my Laptop . They both worked fine on my Desktop. Another question for you is do you Have any of the SE # 2 Disks Left . I had ordered two copies of the SE #2 disk .But I received one copy of SE # 1 and a Copy of SE # 2 . Don't get me wrong I will gladly keep SE # 1 cause I was going to order it sooner or later also ,But I needed another copy of SE # 2 so I could send it to an over seas gentleman that needed one . Please let me know if you have any left and if you do have any more SE # 2 left I will send you another Money order for another Copy Tom .

Thank you again Tom,
Heath

Options: ReplyQuote
Re: Rm SE #2
Posted by: Tom Kirkman (Moderator)
Date: November 03, 2009 01:04PM

Yes, I have some left. They should also be available on the RodMaker website later this week.

................

Options: ReplyQuote
Re: Rm SE #2
Posted by: Ted Morgan (---.gatcf.jcu.edu.au)
Date: November 03, 2009 01:06PM

Try upgrading your Acrobat reader. Files created with newer versions of Acrobat often have such problems with older versions of the program.

Options: ReplyQuote
Re: Rm SE #2
Posted by: Heath Boeddeker (---.runestone.stellarllc.net)
Date: November 03, 2009 01:07PM

Howdy Tom ,

Okay Thank you Tom I will get a Money order out to by the end of this week .

Again Thank you for all the help Tom ,
Heath

Options: ReplyQuote
Re: Rm SE #2
Posted by: Heath Boeddeker (---.runestone.stellarllc.net)
Date: November 03, 2009 01:09PM

Howdy Ted ,

I do have the most updated Acrobat reader on Both of my Computers . on my Laptop I found that Acrobat was a bad update once I uninstalled and re-installed it on the laptop it worked .Thank you Ted .

Heath

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster