I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

New RX8 Blanks?
Posted by: Joe Woolums (12.188.154.---)
Date: November 02, 2009 10:04AM

Does anyone know if Rainshadow is planning on releasing any new models for the RX8 line for 2010??

Options: ReplyQuote
Re: New RX8 Blanks?
Posted by: Tom Kirkman (Moderator)
Date: November 02, 2009 10:10AM

I'll bet that the folks at Batson would know.

....................

Options: ReplyQuote
Re: New RX8 Blanks?
Posted by: Spencer Phipps (65.197.242.---)
Date: November 02, 2009 02:33PM

Last I heard the market slowdown had some new developments on hold, but that was about 6 months ago I think.



Edited 1 time(s). Last edit at 11/02/2009 02:34PM by Spencer Phipps.

Options: ReplyQuote
Re: New RX8 Blanks?
Posted by: Karry Batson (---.olympus.net)
Date: November 02, 2009 03:11PM

Batson adding more models you asked?

Adding too over 400 we have now?

Well because you asked then I will say we have been working on over forty new models mostly RX8 for the last 6 months to add to the line up and on target to introduce some of them if all goes well at the ICRBE :) Most of them are scheduled for completion and introduction July 1 2010.

Too early to spill the beans on what kind but I can tell you all of them will be the kind you want for sure because not only does Batson listen to the end users we actually build rods and fish when we are not selling blanks and components at our day job! Thank you for the continued support and we look forward to another amazing year 2010! Sincerely, Karry Batson

Karry Batson
Batson Enterprises Inc.
Ph: (877) 875-2381
Fax: (360) 683-3579
karry@batsonenterprises.com
www.batsonenterprises.com

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster