SPONSORS
2024 ICRBE EXPO |
Cork grips
Posted by:
Kipp Stewart
(---.gbis.net)
Date: October 28, 2009 12:37PM
Hey guys, Where are some good places to pick up cork grips with a larger I.D. I.m trying to save time on reaming and all I see are the smaller I.D. such as 1/4 and 5/16. I,m sure somebody out there supplies them with the larger sizes like 5/8 or 3/4, but I just can't find them.
Thanks Re: Cork grips
Posted by:
Tom Kirkman
(Moderator)
Date: October 28, 2009 12:43PM
If you'll pick up or make a set of the reverse pilot bits, you can bore your own ID in about 10 seconds or less. Beats the heck out of hand reaming and provides a straight, true bore.
................ Re: Cork grips
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: October 28, 2009 12:43PM
Check out Mud Hole They also have some specials. Bill - willierods.com Re: Cork grips
Posted by:
Lance Dupre
(---.hsd1.la.comcast.net)
Date: October 28, 2009 01:19PM
We stock cork split grip sets with an inside diameter of .450 just for that reason, to make it easier to ream out for larger diameter butt sections.
Link is below to the grips. [swamplandtackle.com] Lance Sorry, only registered users may post in this forum.
|