SPONSORS
2024 ICRBE EXPO |
CLASSIC ROD COAT (HIGH BUILD)
Posted by:
Bill Davidor
(---.dsl.renocs.sbcglobal.net)
Date: October 26, 2009 08:39PM
Does anyone have any experience with Classic Rod Coat (High Build) from B.D. Classic Enterprises?
A friend has some left that is approximately 1.5 years old with Part B having turned to yellow where the directions state that the shelf life is approximately 1 year. Will call them tomorrow but was curious if anyone had any comments/experience with this product. Thanks in advance, Bill Re: CLASSIC ROD COAT (HIGH BUILD)
Posted by:
Tom Kirkman
(Moderator)
Date: October 26, 2009 08:42PM
They're shouldn't be any appreciable shelf life on epoxy. All the hardeners will tend to amber or turn yellow over time but this doesn't affect the set, cure or long term use of the product.
.............. Re: CLASSIC ROD COAT (HIGH BUILD)
Posted by:
Ken Preston
(---.bltmmd.fios.verizon.net)
Date: October 27, 2009 07:01AM
I have some that is over 2 years old. It still works just fine but the hardener is dark yellow / light brown Sorry, only registered users may post in this forum.
|