SPONSORS
2024 ICRBE EXPO |
Calstar Grafighter 765XL
Posted by:
gary chesters
(---.kpn.net)
Date: October 08, 2009 03:55AM
I have a pair of very nice actioned 5ft 8inch stand up rods on calstar Grafighter760L blanks(they have 4 inch cut from the butt)
I would like to have two slightly lighter versions made.Would a Gafighter 765xl blank have a the same sort of action (but lighter) with 10 inches cut from the butt or does it shut down further away from the tip being a longer blank I live in england so I just cant go pull on a blank Regards Gary Re: Calstar Grafighter 765XL
Posted by:
Whit Engle
(---.prenova.com)
Date: October 09, 2009 08:51AM
And the question is?
Whit Re: Calstar Grafighter 765XL
Posted by:
gary chesters
(---.cable.ubr03.roth.blueyonder.co.uk)
Date: October 09, 2009 09:06AM
Sorry for not being clear , I am worried that if the blank shuts off much further away from the tip than the 760L then the action will be too slow
(with 4 inches off the butt the 760 L still has a fast action) has any body cut 10 inches off the butt of a 765xl and what was the action like ( I know I could go with a fast action 660 e glass blank and 5ft 8 inch would be ok ,but I would like to stay with Graphiters- but something a little lighter than a 760L Regards gARY Sorry, only registered users may post in this forum.
|