SPONSORS
2024 ICRBE EXPO |
Old Issues +1
Posted by:
Tom Kirkman
(Moderator)
Date: September 20, 2009 01:54PM
I posted this yesterday and found out today that I can squeeze 7 issues into a priority mail envelope. So, I'll add another issue, for a total of 7. I have a smattering of other older issues all few in their respective number and will add one of them to the stated mix. No extra charge. The orders that have already come in will also get 7 issues instead of the 6 originally advertised.
Several have asked for a decal in with the back issues and I can easily fit a couple into each order, so those will go along for the ride as well. ................... Clearing out the last of the oldest RodMaker back issues, I have 7 early issues that are too few in number to put or keep on the website. I can make up a few sets for those interested and sell them at less than cost just to move them on out. (The sets will now include 7 issues for the same price.) So, $15 gets these 7 issues plus free USPS Priority Mail shipping (That’s $5 right there). They have been separated into sets. All 7 issues for $15 which includes shipping. I have about 30 to maybe 40 sets total. Check or MO to: RodMaker, PO Box 1322, High Point, NC 27261 Yes, I will accept PayPal. rodmaker@earthlink.net is the recipient address. Volume 1 #3 Long Foot Control Finishing Problems Solved Mini-Lathe Test Product Test - CP811 Letters Tools Techniques Photo Gallery The Boltman Q&A Reader Tips Final Thoughts Volume 2 #5 (Reproduction) Interview with Gary Loomis National Heddon Museum Guide Spacing Grid System Apprenticeship: Step to Mastery Letters News New Products Photo Gallery Q&A Classifieds Final Thoughts Volume 4 #2 The Truth About Color Preserver The Revolver Rod Moun ting Butt Caps and Gimballs The Bamboo Corner - Gluing Strips Book Review Letters News New Products Photo Gallery Q&A Classifieds Final Thoughts Volume 4 #3 No-Foregrip Casting Rods Mermaid Weave Pattern Fly Rod Grips Advantage of Rod Repair Guide Foot Preparation The Bamboo Corner - Ferrules, Seat & Grip Letters News New Products Photo Gallery Q&A Classifieds Final Thoughts Volume 5 #2 Building Cork Composite Grips Water Break Free Surface Preparation Making Ferrule Plugs Letters News New Products Photo Gallery Q&A Classifieds Final Thoughts Volume 5 #4 (will substitute another issue if this one runs out) Introduction to Weaving Black Feet, Artifacts of Process, Education and Competitive Grace Packaging for Marketing Custom Rods Anniversary Interview Letters News New Products Photo Gallery Q&A Classifieds Final Thoughts *Plus 1 more issue of my choice. .................... Edited 1 time(s). Last edit at 09/20/2009 01:56PM by Tom Kirkman. Re: Old Issues +1
Posted by:
keith osborn
(122.128.88.---)
Date: September 20, 2009 10:09PM
Hi Tom
can you send any to australia Re: Old Issues +1
Posted by:
Tom Kirkman
(Moderator)
Date: September 20, 2009 10:47PM
Sorry, it's not possible for that price nor do I have the time to fill out the customs forms, drive to and then stand in line at the post office. Again, sorry.
.............. Re: Old Issues +1
Posted by:
keith osborn
(122.128.88.---)
Date: September 20, 2009 11:24PM
Thats ok i just thought i would ask as i cannot by over here Re: Old Issues +1
Posted by:
Steven Libby
(---.hsd1.ma.comcast.net)
Date: September 21, 2009 05:38PM
Hi Tom,
I have been very interested in building a bamboo rod and have done some work so far, but find a lot of the articles, books and videos available, from internet forums, etc simply fall short of what I need compared to the articles that I find in Rod Maker - I'm not sure if it's the writing styles, the depth of material, the ability to put it into laymans terms, or what...but they just fall short of what I need. Anyway, there are several articles related to bamboo in Rod Maker issues that I have that have proven invaluable to me...but by the time I discovered Rod Maker there were still several other issues that I could not find or purchase that have bamboo articles in them. Would any of these by chance be available in your archives (or maybe someone thats looking at this post has one or two of these issues for sale?) that I might be able to purchase? I really wish there was a comprehesive collection on bamboo in Rod Maker style, but I understand that maybe the 'ecomonies of scale' dont permit it. Thanks for all you have given. Thanks so much in advance, Steve Bamboo articles/Issues that I'm looking for: Issue# and Article description: 3-3 roughing. nodes 4-1 sticky situation 4-2 Sand, Straighten & Ferrule 4-6 economies of scale Re: Old Issues +1
Posted by:
Tom Kirkman
(Moderator)
Date: September 21, 2009 06:00PM
4-2 is the only one I have still any copies of. Sorry.
They turn up from time to time on the buy/sell page. ................ Re: Old Issues +1
Posted by:
francisco concepcion
(---.sip.mia.bellsouth.net)
Date: September 22, 2009 06:34AM
tom check is on the mail. Re: Old Issues +1
Posted by:
gene bethea
(---.dhcp.embarqhsd.net)
Date: September 22, 2009 08:08AM
my check also in the mail-p- Sorry, only registered users may post in this forum.
|