SPONSORS
2024 ICRBE EXPO |
Are you looking for something new as far as Trigger seats?
Posted by:
Karry Batson
(---.olympus.net)
Date: September 03, 2009 05:06PM
I wanted to give you a sneak Peek at the new Alps Aluminum Trigger Seats.
These have finally been approved after years of research and development and will be available by 10/15. [www.rodbuilding.org] ITEM # LENGTH mm(in) I.D.mm(in) MSRP AT16-B 112mm(4.40in) 15.7mm(.618in) $38.95 AT16-S 112mm(4.40in) 15.7mm(.618in) $38.95 AT20-B 130mm(5.12in) 19.3mm(.760) $44.61 AT20-S 130mm(5.12in) 19.3mm(.760) $44.61 Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Re: Are you looking for something new as far as Trigger seats?
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: September 03, 2009 05:10PM
Karry that is flat pretty! :-)
What do they weigh roughly? DR Re: Are you looking for something new as far as Trigger seats?
Posted by:
Karry Batson
(---.olympus.net)
Date: September 03, 2009 05:19PM
Roughly 2 ounces. Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Re: Are you looking for something new as far as Trigger seats?
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: September 03, 2009 05:27PM
Thanks Karry....very very nice.
DR Re: Are you looking for something new as far as Trigger seats?
Posted by:
Mo Yang
(---.static.rvsd.ca.charter.com)
Date: September 04, 2009 01:45AM
Beautiful. But I'm curious about the 'years of research and development' part. Is there something unusual about the design?
Mo Re: Are you looking for something new as far as Trigger seats?
Posted by:
Andy Klosky
(---.kwk.clearwire-dns.net)
Date: September 04, 2009 02:57AM
What does the inside diameter look like where it mates to the blank? Any blank through grip options? Looks like it could be real nice on some set-ups!
Thanks for the preview Karry. Re: Are you looking for something new as far as Trigger seats?
Posted by:
Buzz Butters
(---.ripon.k12.wi.us)
Date: September 04, 2009 09:25AM
Karry,
I sure hope these are going to be at the Expo this year? Have your vendors well stocked with these babys. Buzz Re: Are you looking for something new as far as Trigger seats?
Posted by:
Karry Batson
(---.olympus.net)
Date: September 04, 2009 11:36AM
Research development is the best part of our job we actually get to fish :) I think that most of you know we try and go the extra mile checking for as many details as we can like making sure the fixed hoods are tight and stay tight, the seats are comfortable and except all reel foots or as many as we can check also weight reduction as well as cosmetics. This seat has been a work in progress to say the least. We feel we have a big hit on our hands and this is why I wanted to give you all a sneak peek, we are very excited.
The inside has internal Ribbing for ensured bonding just like all of our Aluminum seats. The AT16 and AT20 do not feature blank exposed because of all the different sizes you would have to make. The AT16 does feature cushioned hoods as well for sure fit on smaller reels. These will be available October 15 and a limited supply so place your orders with our distributors soon to make sure you are in line for them. Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Sorry, only registered users may post in this forum.
|