SPONSORS
2024 ICRBE EXPO |
Cork Glue Up
Posted by:
Jim Fielding
(69.196.211.---)
Date: August 24, 2009 08:45PM
Is titebond an acceptable agent for bonding EVA to cork? Re: Cork Glue Up
Posted by:
larry basilio
(---.phlapa.fios.verizon.net)
Date: August 24, 2009 09:13PM
Jim . I think so , I know cork to cork is good Re: Cork Glue Up
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: August 24, 2009 09:50PM
Contact cement or Rod Bond. Re: Cork Glue Up
Posted by:
Tom Kirkman
(Moderator)
Date: August 24, 2009 10:04PM
Titebond is excellent for cork to cork. Only thing to remember is that if you're gluing the rings on a steel mandrel the moisture in the Titebond will cause rusting of the mandrel if you're not quick to get the grip turned and removed from the mandrel. Leaving the glued cork on the mandrel for more than a day or so is going to result in serious rust on the mandrel.
................ Re: Cork Glue Up
Posted by:
Jim Fielding
(69.196.211.---)
Date: August 24, 2009 11:17PM
Thanks Guys. I used Titebond for the rings and Rod Bond for the EVA to the ring. Sorry, only registered users may post in this forum.
|