I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

How can I see the latest "library" edition?
Posted by: Tim Collins (---.hsd1.mi.comcast.net)
Date: August 23, 2009 05:08PM

Just asking a simple question here - do I have to change the settings in my Control Center to view the latest editions in the library or something? The reason I ask is the only New Guide Concept Primer article I see is the old table edge method from Volume 7 - Issue #1. I have Volume 10 - Issue #4 which is the 27x method but if someone searches the library and sees the same older version like me, this could cause some of the confusion that clogs up the site.

If the old version is actually the only one listed, seems to me it should either be replaced with the current 27x text or just deleted with a memo directing people to order Volume 10 - Issue #4 for more info.

Options: ReplyQuote
Re: How can I see the latest "library" edition?
Posted by: Ken Finch (---.orlando-21rh15-16rt.fl.dial-access.att.net)
Date: August 23, 2009 05:29PM

I think there is only one library edition and you're probably seeing it already.

Any confusion about the NGC seemed to stop once the V10 #4 issue with the 27X factor came out. The text and articles were really well presented and it sure makes things easy. The earlier problem was that with Fuji's spool upsweep method you had many reels with so little or no upsweep that the choke guide was located out off the end of the rod. And this happened even on common reels with standard length blanks. I used to run into it quite often. People were on here every week asking about what to do when they ran into this.

I cannnot and will not speak for Tom but the fact that he has put up any articles into the library shows that he has not turned a blind eye to the rod builders who are nonsubscribers of the magazine. They may not get as up to date information as the subscribers do but they still get quite a bit and considering they pay him nothing I think its a nice gesture on his part. So I do not worry too much about how up to date the library is. If he chooses to put up the later article thats his business but I know that when the non subscribers start getting the same information that the subscribers get and just as timely, then there will be no more subscribers and no more Rodmaker. And then so many of the techniques we benefit from will be a lot longer coming if at all. Just my .02.

Options: ReplyQuote
Re: How can I see the latest "library" edition?
Posted by: Tom Kirkman (Moderator)
Date: August 23, 2009 06:18PM

I try to put up a few new articles each year as funds allow. I am obligated to the magazine and the magazine's customers, however, so that remains the priority.

If things go well over the next few months I may add the newer NGC article at that time.

...............

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster