SPONSORS
2024 ICRBE EXPO |
Permagloss over Madeira
Posted by:
Mike Rademacher
(---.dyn.optonline.net)
Date: August 09, 2009 12:13AM
Is color preserver required when coating Madeira thread (polyneon) with Permagloss? Will the silicone cause fisheyes in the permagloss finish like it will with 2 part epoxy? thanks as always for the help Re: Permagloss over Madeira
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: August 09, 2009 12:33PM
Try it on a piece of scrap blank. Bill - willierods.com Re: Permagloss over Madeira
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: August 09, 2009 12:50PM
I don't think that silicone would repel the PG but with out CP, the colors would dramatically change Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Permagloss over Madeira
Posted by:
Andy Klosky
(---.kwk.clearwire-dns.net)
Date: August 09, 2009 10:38PM
wet the thread with alcohol to see if you like the color. Should be close to what you will get with no CP. Sorry, only registered users may post in this forum.
|