SPONSORS
2024 ICRBE EXPO |
White blank info
Posted by:
Rob Puskas
(---.69.17.98.dynamic.ip.windstream.net)
Date: July 25, 2009 11:49PM
I am looking for a white blank for a friend, looking for a 30 to 50 lb class glass rod, 6'6" to 7' ,who carry them now, I know Pacific Bay did a few years ago but they don't list them now, any ideas.
Thanks, Rob Re: White blank info
Posted by:
Steve Buchanan
(---.ellijay.com)
Date: July 26, 2009 10:46AM
I have foound that it is much easier for me to paint a blank the color I want than it is to find one pre-painted. Krylon fusion is a great paint for blanks. Automotive paints work well too if you have the paint store add plenty of flex additive. Top coat either with a couple of coats of Minwax Helmsman spar urethane in the clear gloss and you are good to go. Wal-Mart and Ace hardware both carry the Krylon and the Spar Urethane. Re: White blank info
Posted by:
Robert Moffat
(---.252.205.68.cfl.res.rr.com)
Date: July 26, 2009 11:42AM
I was at Mud Hole the other day and they have white 30 to 50 lb class blanks. Might give them a try. Re: White blank info
Posted by:
Andrew McDermott
(---.meganet.net)
Date: July 26, 2009 03:39PM
Check with Blackfin Rods, www.blackfinrods.com, they have painted blanks for me before, beautiful snow white awlgrip. They should have a blank that will fit your needs as well!!! Re: White blank info
Posted by:
Rob Puskas
(---.241.140.67.dynamic.ip.windstream.net)
Date: July 26, 2009 04:43PM
Thanks for the reply's, I need to look on Mudhole's site again, didn't see it there before.
Thanks Re: White blank info
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 26, 2009 07:44PM
I beleive Lamiglass and Batson has some white blanks. Bill - willierods.com Re: White blank info
Posted by:
Ed Grella
(---.dyn.optonline.net)
Date: August 22, 2009 12:10AM
Seeker also makes some blanks in white! Sorry, only registered users may post in this forum.
|