SPONSORS
2024 ICRBE EXPO |
Weaving
Posted by:
Lance Bosma
(---.244.64.100.Dial1.Chicago1.Level3.net)
Date: December 06, 2002 07:41AM
I have not done weaving on a rod. I was wondering what I need to get started. What kind of tools do I need? What is a good book or video? Thanks Lance Re: Weaving
Posted by:
John Bumstead
(---.lnh.md.webcache.rcn.net)
Date: December 06, 2002 08:36AM
Lance: There are several videos available on weaving. Doc Ski, Artie Hebert, and Cam Clark are three that come to mind. I'm sure that some of the supplires listed to the left stock them. John Re: Weaving
Posted by:
Justin Hansen
(---.dyn.optonline.net)
Date: December 06, 2002 10:03AM
From experience I can tell you that a loom is basically necessary unless you can undure a painfull learning curve. Not that it can't be done without it but it makes it much easier. The wonder weaver, which may be expensive to some, makes weaver a dream for me instaed of the chore it used to be. I only other advice I have is to count and recount your threads before you start because that is the worst when you are almost done with a weave only to reach for a thread and have it not be there. Hope this helps. Re: Weaving
Posted by:
Tom Kohl (Petro Chem)
(---.worldcom.com)
Date: December 06, 2002 01:40PM
Hi Lance- I have a few copies of the Doc Ski video available (it's an excellent resource), if you're interested, just email me thru my site on the left. I'm in Chicago, too! Tom Kohl Petrochemical Re: Weaving
Posted by:
Brian Patterson
(---.coatsv01.pa.comcast.net)
Date: December 06, 2002 03:36PM
A recent issue of rodmake came out and it had a great arcticle on weaving, go to serivices misc on the left side of the page and click on rodmaker magazine, then look through the back issue page. Re: Weaving
Posted by:
Tom Kirkman
(---.dialsprint.net)
Date: December 06, 2002 03:44PM
It's volume 5 #4. .......... Re: Weaving
Posted by:
Lance Bosma
(---.28.43.50.Dial1.Chicago1.Level3.net)
Date: December 08, 2002 01:46AM
Thank you for the help. Lance Re: Weaving
Posted by:
Paul Simpson
(---.nv.iinet.net.au)
Date: December 09, 2002 10:04PM
I'm Interested in this subject also.. Unfortunately they will no longer ship the magazine outside the US. There is a distributor for the mag in Canada..but that doesnt help me in Aus..If anyone knows of someone here (in Australia) that sells it please let me know. Thanks Paul Re: Weaving
Posted by:
Kevin Malpass
(---.proxy.aol.com)
Date: December 09, 2002 10:08PM
I think somebody said that Ian Miller was selling them down under. Do a search on this site for his name and lift his email address and ask direct. Re: Weaving
Posted by:
Tom Kohl (Petro Chem)
(---.worldcom.com)
Date: December 10, 2002 09:15AM
Here's Ian Miller's site, just cut and paste it into your browser's address bar. [www.millerods.com] Hope it helps! Tom Kohl Petrochemical Sorry, only registered users may post in this forum.
|