SPONSORS
2024 ICRBE EXPO |
thread size
Posted by:
Jerry Hirsch
(---.neo.res.rr.com)
Date: July 18, 2009 01:26PM
Hi,
I would like to ask what thread size are you using for jigging rod (300g) and what kind of finish (high or Lite) are you using and how many coats. Thank you Jerry Re: thread size
Posted by:
Jan Zeiters
(---.dsl.dynamic.sonic.net)
Date: July 18, 2009 04:47PM
How are you planning to wrap it?
Were I building it I'd do the thread art (Butt wrap) in Madeira (Approx A size) and the guide base wraps in Madeira then wrap the guides in C or D depending on the effect I was shooting for. As for finish I'd coat the Madeira with CP due to the silicone and for finish probably use 2 coats of a lite build finish, I use Thread Master, Classic coat or Flex coat and have had good results with all. Sorry, only registered users may post in this forum.
|