SPONSORS
2024 ICRBE EXPO |
Decals
Posted by:
Patrick Rutledge
(---.dsl.bell.ca)
Date: July 17, 2009 11:27AM
Can I use Gudebrod 1 part finish (840) or rod varnish (822) to coat decals?
Or if I use epoxy, as an alternative to putting a coat of epoxy on before the decal can I put a coat of permagloss on? I know it will eat the decal if applied on top but I would think it would be ok underneath and should help with mimimzing the amount of weight added to the rod. Thanks Patrick Rutledge Re: Decals
Posted by:
Tom Kirkman
(Moderator)
Date: July 17, 2009 03:43PM
Yes, they're both water based to my knowledge and shouldn't harm the decals.
............ Sorry, only registered users may post in this forum.
|