SPONSORS
2024 ICRBE EXPO |
Stripping a rod
Posted by:
Jeff Bodnar
(---.gvllcmtc01.gnvlnc.ab.dh.suddenlink.net)
Date: June 24, 2009 06:28PM
What is the best method of stripping a rod to the blank? Re: Stripping a rod
Posted by:
John Krukemeier
(---.dsl.ipltin.sbcglobal.net)
Date: June 24, 2009 06:56PM
I use steam to soften the epoxy and a new razor blade to cut the the wraps above the guide feet when possible. Re: Stripping a rod
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: June 24, 2009 08:27PM
There is a great article on the subject by Ralph O'quinn in the LIBRARY section (see link in the black bar above) Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Stripping a rod
Posted by:
Tom Kirkman
(Moderator)
Date: June 24, 2009 08:45PM
If you're talking about getting the finish off the rod blank itself, then either scraping the finish or using a mild citrus type paint remover is your best bet.
.......... Re: Stripping a rod
Posted by:
Jeff Bodnar
(198.232.70.---)
Date: June 25, 2009 10:33AM
Thank You for your reply's. I did not notice the LIBRARY,thank you for pointing it out. I tried SEARCH but kept getting How to build a fly rod. Sorry, only registered users may post in this forum.
|