SPONSORS
2024 ICRBE EXPO |
Sorry another decal printer question
Posted by:
Fernando Torres
(---.dyn.optonline.net)
Date: June 23, 2009 05:53PM
Hi All:
Don't want to tie up the forum with the same boring question, but if you would rather answer via email that's fine too. Just wondering if my current printer would be suffice to print decals with. I have not attempted it and will not for a month or so, but was wondering if my HP 3210 Photo Smart printer would do? Thanks in advance. Fernando Torres-NERB Re: Sorry another decal printer question
Posted by:
Tom Kirkman
(Moderator)
Date: June 23, 2009 06:13PM
Yes, depending on the media you use.
Papillo, the brand suggested in the last article, is supposedly not suitable for use with archival inks which nearly any printer made in the last 4 or 5 years will utilize. But some are using them with good results. .............. Re: Sorry another decal printer question
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: June 23, 2009 08:07PM
I have been using an HP with the archival inks that aren't supposed to work and have had excellant results with the white vynal, Holoshine, silver and gold. I use FixaTiff matte over the decals and don't touch for at least 24 hours after they come off the printer Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Sorry another decal printer question
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: June 23, 2009 08:23PM Sorry, only registered users may post in this forum.
|