SPONSORS
2024 ICRBE EXPO |
Hot Handle
Posted by:
Alex Dziengielewski
(---.scana.com)
Date: June 18, 2009 12:45PM
Playing with making something similar to Gardner's Hot Handle...
Suggestions for getting the foam core out of there besides chipping away? Seems this foam is resistant to most chemicals... ----------------- AD Re: Hot Handle
Posted by:
Tom Kirkman
(Moderator)
Date: June 18, 2009 01:13PM
Don't use foam - mold the carbon around aluminum or copper tubing and slide it off after forming it. You will have to coat the tube with some wax so the epoxy won't bond the skin to the tube.
.............. Re: Hot Handle
Posted by:
john timberlake
(---.triad.res.rr.com)
Date: June 18, 2009 01:30PM
alex, give me a call i have a suggestion that may work
336-778-1308 Re: Hot Handle
Posted by:
bill boettcher
(---.150.popsite.net)
Date: June 18, 2009 02:22PM
John: that is what this board is for, passing along tips and tricks ?? Bill - willierods.com Re: Hot Handle
Posted by:
Richard Kuhne
(---.listmail.net)
Date: June 18, 2009 07:07PM
It might be a long explanation that would be very time consuming to type out. Sorry, only registered users may post in this forum.
|