I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

lamiglas GBT 84 1M Question
Posted by: Tony Politi (---.dyn.optonline.net)
Date: June 16, 2009 07:26PM

I have a Lamiglas GBT 84 1M blank in the basement, that has been there a while. Does anyone have the specs on this blank? I used to have an older blank catalog, but I must have organized and threw it out, LOL.

Thanks
Tony

Options: ReplyQuote
Re: lamiglas GBT 84 1M Question
Posted by: bill boettcher (---.an2.nyc41.da.uu.net)
Date: June 16, 2009 07:44PM

HERE CHECK OUT THIS SEARCH :[www.google.com]
Then try a search of this site.

Bill - willierods.com

Options: ReplyQuote
Re: lamiglas GBT 84 1M Question
Posted by: Spencer Phipps (65.197.242.---)
Date: June 16, 2009 08:49PM

It's rated a 30 lb blank if I remember right, a very stiff one.

Options: ReplyQuote
Re: lamiglas GBT 84 1M Question
Posted by: Tony Politi (---.dyn.optonline.net)
Date: June 16, 2009 08:56PM

Huh, I tried that search, just forgot the word "blanks" and came up with very little. Thanks
Tony

Options: ReplyQuote
Re: lamiglas GBT 84 1M Question
Posted by: Bernie Cohen (---.proxy.aol.com)
Date: June 16, 2009 09:03PM

I have built many Gbt841m rods in the past years. Very good blank.The specs are as follows

Butt 0.725
Tip 7.5
Line 40
Weight 5 1/2

Hope this helps .

Options: ReplyQuote
Re: lamiglas GBT 84 1M Question
Posted by: matthew jacobs (---.2.117.75.dynamic.ip.windstream.net)
Date: June 16, 2009 11:47PM

Tony Politi Wrote:
-------------------------------------------------------
> I used to have an older
> blank catalog, but I must have organized and threw
> it out,

Don't ever "organize". Those old books are the ones worth having as most of that stuff isn't written down anywhere else.

Options: ReplyQuote
Re: lamiglas GBT 84 1M Question
Posted by: Billy Vivona (---.nycmny.east.verizon.net)
Date: June 19, 2009 02:14PM

TOny, that blank was the reason Lami had to come up with a COmposite CGBT series to combat teh breakages occuring when fishermen began switching over to no stretch braided lines. If you are going to use it with braid, make sure you don't high stick it, maybe use a 15-20' mono leader, as the blank is quite stiff and with braid it's a combo that will lead to a lot of pulled hooks and missed hooksets.

Options: ReplyQuote
Re: lamiglas GBT 84 1M Question
Posted by: Tony Politi (---.dyn.optonline.net)
Date: June 19, 2009 10:19PM

Wow, great info Billy. Funny thing is I thought it was softer than I am used to, LOL. Not too sure what I'm going to do with it yet. If only I can figure out what the specs for the other blanks that I have hanging from the rafters are.

Tony

Billy Vivona Wrote:
-------------------------------------------------------
> TOny, that blank was the reason Lami had to come
> up with a COmposite CGBT series to combat teh
> breakages occuring when fishermen began switching
> over to no stretch braided lines. If you are going
> to use it with braid, make sure you don't high
> stick it, maybe use a 15-20' mono leader, as the
> blank is quite stiff and with braid it's a combo
> that will lead to a lot of pulled hooks and missed
> hooksets.

Options: ReplyQuote
Re: lamiglas GBT 84 1M Question
Posted by: Billy Vivona (---.nycmny.east.verizon.net)
Date: June 19, 2009 10:39PM

TOny, figure the specs out yourself. YOu can bring everything you got to a NERBs gathering in the Fall and I'll rate them for you if you want.

I think that blank is comparable to teh orgiinal CGBT841M, but has since been reclassified as teh CGBT841MH, or the BL7040 factory rod. It's a Striped Bass, heavy Blackfish type of rod.

Options: ReplyQuote
Re: lamiglas GBT 84 1M Question
Posted by: Tony Politi (---.dyn.optonline.net)
Date: June 20, 2009 10:20AM

Billy, truth be told, I forgot I had the blanks hanging in the basement to begin with, LOL. I have a couple of other blanks I have to build on first, including 2 Swampland Castaway blanks that I picked up at the show, so the others aren't a priority. But if I am able to make a fall gatheing I will toss 'em in the truck.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster