SPONSORS
2024 ICRBE EXPO |
Source for 5/8" woven graphite tube?
Posted by:
Tim Collins
(---.hsd1.mi.comcast.net)
Date: June 13, 2009 09:33PM
Anyone know of a source for 5/8" woven graphite tubing? Mud Hole has some for making Tennesse handle but they're all about an inch in diameter and I need something smaller. Two 12" long pieces is what I'm looking for, thanks. Re: Source for 5/8" woven graphite tube?
Posted by:
Tom Kirkman
(Moderator)
Date: June 13, 2009 09:45PM
You can make your own in minutes, if you want. It's a very simple procedure and you can make such tubing in any diameter you want. The cost is maybe a buck a foot.
Other than that, you can do a search for tubing suppliers. It's readily available, but somewhat expensive. ........... Re: Source for 5/8" woven graphite tube?
Posted by:
Robert Russell
(---.cable.mindspring.com)
Date: June 14, 2009 08:58AM
Tim,
I just sent you an email. I don't think I can list my source as they are not a site sponsor. Robert Sorry, only registered users may post in this forum.
|