SPONSORS
2024 ICRBE EXPO |
Nice LED gooseneck light
Posted by:
John Kepka
(---.dsl.stlsmo.swbell.net)
Date: June 05, 2009 02:34PM
Every once in a while the board gets a thread about shop lighting etc. so I figured guys who live near Woodcraft might be interested in this item. While I am not a fan of LED lights with the blueish tinge, I saw this little gooseneck 7 LED light at Woodcraft (29.95 strategically located at the register) when I went there to get some supplies. It comes with a magnetic base which can lift the end of a small lathe off the table without letting go and a clamp base for mounting the magnetic base on a table etc. The light beam is slightly focusable. I have used it for some small work on the lathe and today I just clamped a 5/8 inch L bracket onto the end of the rod wrapper uprights and let the magnetic base hold it on the bracket. Looks like it will work fine and does not take up a lot of room and interfere with working. This is a little light that I would like to have more than one of and pitch out all the lamps that I have tried to use for up close work that are clumsy and suck up a lot more power. John God bless the troops and USA Re: Nice LED gooseneck light
Posted by:
Tom Kirkman
(Moderator)
Date: June 05, 2009 05:03PM
I'm sure it's a good unit.
Talk to Clyde Alho at the Rod Shop as well. He carries the excellent line of Zebra Lighting Systems. .............. Re: Nice LED gooseneck light
Posted by:
Robert Balcombe
(---.rb2.gh.centurytel.net)
Date: June 05, 2009 07:50PM
I have what they call a cold amp florescent light It give you a natural light No Amber, Blue or Yellow color. The lighting gives you what your thread colors well look like out side Good Wraps Bob Sorry, only registered users may post in this forum.
|