SPONSORS
2024 ICRBE EXPO |
calstar 655 and 765xlblank questions
Posted by:
gary chesters
(---.cable.ubr03.roth.blueyonder.co.uk)
Date: May 25, 2009 01:55PM
Can any body help me with the following
What is the diamiter of a calstar e- glass 655 (20-50) 55 inches from the tip , I need to know if it will fit in a no 1 unibut furrell when cut at this point also what would be the diamiter 28 inches from the tip (to get an idea of comparison with my other rods) I also would like to know if the shut of point where the blank stops bending on a calstar graphiter 765xl (20-50) is it much further from the tip than a 760l (i have a couple of 760l cut to 5ft 8inces from the butt that still have a nice fast action and i am looking for something a little lighter, that I can cut to the same length with a similer action.) Regards and thank you gary Sorry, only registered users may post in this forum.
|