SPONSORS
2024 ICRBE EXPO |
Threads??
Posted by:
Bob Gardner
(162.57.162.---)
Date: May 16, 2009 04:17PM
Which types of threads should a guy stay away from? Any advice would be great.... Re: Threads??
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: May 16, 2009 07:39PM
Cotton & Rayon Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Threads??
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: May 16, 2009 08:11PM
What Raymond said! If you use Polyestor sewing threads such as Madeira be aware that they are often lubed for sewing machine use and CP should be used! Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Threads??
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: May 16, 2009 10:47PM
Anything that is not specifically made for rod building.
DR Re: Threads??
Posted by:
Steve Broadwell
(---.141.17.98.dynamic.ip.windstream.net)
Date: May 16, 2009 11:01PM
Not necessarily so. Madiera is not made for rodbuilding, and a lot of fancy threadwork is done with it. And, just about the only thing I use anymore for the "standard" colors is Coats and Clark trilobal polyester. I have at least 20 spools, and have never had the first problem with any silicon impregnation. I can get a big ole spool for only about $4, and I actually like the way it goes on better than nylon now. Re: Threads??
Posted by:
Bob Gardner
(162.57.162.---)
Date: May 18, 2009 01:24PM
Thanks for the advice gentleman. Sorry, only registered users may post in this forum.
|