SPONSORS
2024 ICRBE EXPO |
Maderia thread question
Posted by:
Hillrie Rouse
(---.proxy.aol.com)
Date: April 04, 2009 02:53PM
I am over wrapping gold metalic With mederia black. Do I need cp an the black maderia?----------------------------------------------------Thanks in advance Re: Maderia thread question
Posted by:
allen forsdyke
(---.colc.cable.ntl.com)
Date: April 04, 2009 03:05PM
YES ...................ALL maderia has silicon in it
UNLESS you want fish eyes in it in which case NO Re: Maderia thread question
Posted by:
William Bartlett
(---.br1.davs.wv.frontiernet.net)
Date: April 04, 2009 04:18PM
2 coats. let dry between coats. Bill in WV Re: Maderia thread question
Posted by:
Jim Rippe
(---.chcgilgm.dynamic.covad.net)
Date: April 04, 2009 05:41PM
I would recommend that you do two test wraps. Do both wraps the same and coat one with CP and nothing on the other. Now put the finish coat on them. Some of us have had problems with white spots with CP on the black threads from Maderia. And yes you can do tartans with Maderia without the worries of fisheyes. Do not use any flame on the finish. Billy can confirm this.
[www.rodbuilding.org] [www.rodbuilding.org] Re: Maderia thread question
Posted by:
Hillrie Rouse
(---.proxy.aol.com)
Date: April 04, 2009 05:51PM
What's gonna happen if I don't use cp? That is my question. Re: Maderia thread question
Posted by:
Jim Rippe
(---.chcgilgm.dynamic.covad.net)
Date: April 04, 2009 07:08PM
The photos will tell the store.... the threads go translucent. Once again, do a test wrap on a dowel, scrap blank, PVC pipe. Experiment.
[www.rodbuilding.org] [www.rodbuilding.org] Re: Maderia thread question
Posted by:
Michael Joyce
(---.hsd1.ma.comcast.net)
Date: April 05, 2009 07:15AM
Use Gudebrod black "A" and you have no worries.??????
MJ NERB that types with a bar of Ivory soap in his mouth. Sorry, only registered users may post in this forum.
|