SPONSORS
2024 ICRBE EXPO |
Fuji TLSG #8 height
Posted by:
Keith Neidhart
(---.sw.biz.rr.com)
Date: April 02, 2009 01:35PM
Can someone give me a height measurement? (from blank to bottom of ring) I don't have a TLSG 8 here to see the height. I once found a complete chart for fuji guides (in japanese) but the #'s were in mm's so I could still use it. It had all the dimensions, from height to foot size and length, etc. Of course I can't find it anymore. Anyone remember that chart?
Thanks! Re: Fuji TLSG #8 height
Posted by:
Mark Griffin
(---.lsanca.dsl-w.verizon.net)
Date: April 02, 2009 02:11PM
Not sure what you mean by "bottom of the ring". I assume you mean closest to the guide foot, but I measured both just incase.
5.11mm/0.2015" from blank to botton ID of the ring 10.76mm/0.4235" from blank to top ID of the ring Mark Griffin [] C&M Custom Tackle San Dimas, California Re: Fuji TLSG #8 height
Posted by:
Keith Neidhart
(---.sw.biz.rr.com)
Date: April 02, 2009 05:50PM
Sorry for the wording, exactly what I needed. I didn't know if the TLSG 8 was "low" like the TLSG 6 and 7's or if it was "tall" like the TSG 8's (or alconite 8's)
Thanks! Re: Fuji TLSG #8 height
Posted by:
Anthony Lee
(---.omega12.maxonline.com.sg)
Date: April 03, 2009 10:00AM
Keith,
According to Fuji's catalog: L = 12.5mm L1 = 7.5mm H =11.8mm L1 is actually the foot print. L is from the front of the foot to the back of the ring frame. H is the overall height. Anthony Lee Sorry, only registered users may post in this forum.
|