SPONSORS
2024 ICRBE EXPO |
Advice on spinning rod
Posted by:
david williams1
(---.dsl.fireflyinternet.com)
Date: April 01, 2009 01:35PM
HI all, I'm loooking to build my first spinning rod, and I have no idea what i really need in terms of length and weight. I want to be able to spin in the surf for bass, and to use on bigger rivers for sea trout, steelhead or similar. Can anyone give me some pointers?
cheers DW Re: Advice on spinning rod
Posted by:
Marty Martin
(---.gsp.bellsouth.net)
Date: April 01, 2009 01:38PM
I would think you would want a steelhead blank set up NGC for a reel in the Shimano 2500 to 4000 range. I have a Forecast SH1084 that would probably so what you are wanting to do. Re: Advice on spinning rod
Posted by:
Spencer Phipps
(65.197.242.---)
Date: April 01, 2009 02:23PM
We need the lure/bait weight requirements for your application to make a good recommendation. Re: Advice on spinning rod
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: April 01, 2009 03:07PM
Dave,
One of the best things you could do is to talk with other fishermen that are fishing the same waters and in the style that you want to fish. Get a consensus of the needed rod and go for it. There are so many variables and local needs and traditions, that it is very tough to recommend any thing specific from afar. If you could specify a line test, a lure size, an expected fish size to be caught, a required casting distance, a rod length range - for ease of use and or transport - the advice will be much better. Take care Roger Re: Advice on spinning rod
Posted by:
joseph p sanchez
(---.sub-75-211-205.myvzw.com)
Date: April 04, 2009 11:10PM
hey , this is awesome guys i just found this page i am going to try to build my own rod,like you i have many question.i fish with light lin 4# to max 6# all spinning.9foot rods with shimano sustainfe 1000, daiwafuego1000 i found that with this,i get some distance.the one thing that i have notice all my rods where made in china ,i have spent a lot of money on these rods. the last rod i just got is the h3titanium team redfish,7'6"by american rodsmith this rod dont say where its made?so,like you im going to try tobuild my rod myself.do any of you know any american maderod blanks,8'6"to 9'6"fast toexfast, and the best guids sizes tha will work.........thank you Sorry, only registered users may post in this forum.
|