SPONSORS
2024 ICRBE EXPO |
EVA & Hypalon grip info
Posted by:
Robert Moffat
(---.253.205.68.cfl.res.rr.com)
Date: April 01, 2009 08:43AM
Tom:
I have read your article in RodMaker Vol7 iss. 3 concerning EVA and Hypalon grips. The last paragraph you state that in future issues there would be further articles on creating other inlays. I have searched the RodMaker site to the left side of the page and I can't seem to find any mention of articles regarding EVA or Hypalon anything. Could you please spin me around several times and point me to the right issues of RodMaker that these articles appear please. Thanx Bob Moffat Re: EVA & Hypalon grip info
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: April 01, 2009 09:08AM
BOb, I'm pretty sure TOm has an article on Image Inlays "Bernie Cohen" style in the works. I think I read Tom saying it was going to be in the June or July issue. I know ?bernie'smethod for doing this style of inlay. Here is a sample of some of Bernie's amazing gripwork: [www.rodbuilding.org]
[www.rodbuilding.org] [www.rodbuilding.org] Re: EVA & Hypalon grip info
Posted by:
Tom Kirkman
(Moderator)
Date: April 01, 2009 09:09AM
The issue that comes out in June will have Bernie's article.
There have been several other articles in RodMaker on EVA inlays and techniques. What types are you interested in? ............. Re: EVA & Hypalon grip info
Posted by:
Robert Moffat
(---.253.205.68.cfl.res.rr.com)
Date: April 01, 2009 10:06AM
Thanx Billy. I just read the article in RodMaker and after reading the last paragraph started to search and found nothing. So I had to ask. I thought that I had missed something along the way. Re: EVA & Hypalon grip info
Posted by:
Robert Moffat
(---.253.205.68.cfl.res.rr.com)
Date: April 01, 2009 10:08AM
Thanx Tom. I am eagerly awaiting the June issue with the article that I am very interested in. You perked my interest in these grips and now I am going to try to do some of them. Re: EVA & Hypalon grip info
Posted by:
Tom Kirkman
(Moderator)
Date: April 01, 2009 10:12AM
Bill Colby did an article last year on a shaded EVA grip. Bernie's article will be along the lines of the pattern/picture type inlays in the grip surface.
................ Sorry, only registered users may post in this forum.
|