SPONSORS
2024 ICRBE EXPO |
Billy Vivona's book
Posted by:
Dale Cecil
(---.207-68.panhandle.res.rr.com)
Date: March 31, 2009 06:27PM
I have Billy's book and would like to know which page the top right side wrap is on it is the green fade. Looks like some variation of a spider wrap. Re: Billy Vivona's book
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: March 31, 2009 06:51PM
That is a Sparkler Pattern, wrapped by Mike Joyce. Unfortunately, you cannot print the corrections off The NERBs site, but you can see them at teh bottom of this link: [northeastrodbuilders.com] YOu can also e-mail me at xlrods@yahoo.com and I will foward you & anyone else a copy of the corrections so they can be printed out. I"m really sorry about this. Re: Billy Vivona's book
Posted by:
Dale Cecil
(---.207-68.panhandle.res.rr.com)
Date: March 31, 2009 06:56PM
So its not in the book? Re: Billy Vivona's book
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: March 31, 2009 07:02PM
The Sparkler Pattern. The cover shot is wrapped by Mike Joyce [www.rodbuilding.org] Re: Billy Vivona's book
Posted by:
Paul Rotkis
(---.gci.net)
Date: March 31, 2009 09:12PM
Did the publisher use "spell check?" Had to get that in there Billy... Re: Billy Vivona's book
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: March 31, 2009 09:20PM
Actually, I spelled every word correctly, eventhough I was VERY tempted to slip in a "TEH" in the Intro. I know several of the books I signed have some "TEH" spelling jokes back there. Re: Billy Vivona's book
Posted by:
Bruce Robb
(---.fai.dsl.dynamic.acsalaska.net)
Date: April 01, 2009 12:16AM
I am glad to learn this cuz my page 50 attempts have been driving me crazy. Short drive tho!
Thanks for the word on the fixes! Love the book anyway! Pesco Ergo Sum Re: Billy Vivona's book
Posted by:
allen forsdyke
(---.colc.cable.ntl.com)
Date: April 01, 2009 03:27AM
billy any chance of emailing me the spacing chart or not?? you emailed me the original page ages ago (before you published ) and it had hand written notes on it saying spacing between c &d was 3mm (but that only worked when i wrapped it with hauser rope LOL) surely that spacing should be 1.5 mm though 6 threads wide @ 4 threads per mm = 1.5mm
but i dunno you the man cheers allen Edited 1 time(s). Last edit at 04/01/2009 03:34AM by allen forsdyke. Re: Billy Vivona's book
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: April 01, 2009 09:56PM
I know I found one misspelling in it. I will look for it later. Freddwhy (Rapt-Ryte) Sorry, only registered users may post in this forum.
|