SPONSORS
2024 ICRBE EXPO |
renzetti turning motor
Posted by:
thad peach
(66.129.100.---)
Date: March 24, 2009 10:01AM
Anyone have the model number for the renzetti turning motor mine just went out and I can't read the name plate? I would like to pick on up from my local Dayton parts supplier if possible just need the number to cross reference. I am talking about the turning motor not the 1/10 hp wrapping motor.
Thanks. Thad Dutchman's Creek Tackle Re: renzetti turning motor
Posted by:
Ken Finch
(---.orlando-21rh15-16rt.fl.dial-access.att.net)
Date: March 24, 2009 11:18AM
Here is what I can find on the label on mine. Model JE Z6069N Class B 115V 1.2 Amp at 1500RPM. Not sure it is a Dayton motor. Re: renzetti turning motor
Posted by:
Lou Wasmund
(---.sd.sd.cox.net)
Date: March 24, 2009 12:02PM
2MO37A it is a Dayton motor. got mine @ Graingers. It bolts right up to the bracket perfectly. You just need to install a plug. Edited 1 time(s). Last edit at 03/24/2009 12:03PM by Lou Wasmund. Re: renzetti turning motor
Posted by:
louis caruso
(---.dyn.optonline.net)
Date: March 24, 2009 04:50PM
I just upgraded with the 1/10 H P motor from Grainger. Best thing I did..... Makes a big differance shaping cork... Sorry, only registered users may post in this forum.
|