SPONSORS
2024 ICRBE EXPO |
Pacific Composites Grafty #15 9'
Posted by:
philip hood
(144.132.148.---)
Date: March 17, 2009 07:31AM
Can anyone tell me where i can get a Pacific Composites Grafty #15 9' to build a fly rod?
I need it to be shipped to Australia. Thanks a million. Re: Pacific Composites Grafty #15 9'
Posted by:
Rohit Lal
(---.NSW.netspace.net.au)
Date: March 17, 2009 09:18AM
G'day Philip
Pacific composites is an Aussie mob so should be able to order the blanks in through your local tacklo. Try calling Mo's as they stock em as well. I just been on the blanks site but cannot locate it under the graphite heading. Have look, you may see it although I have a feeling it may have been discontinued. [www.anglerpacific.com] Re: Pacific Composites Grafty #15 9'
Posted by:
Tom Kirkman
(Moderator)
Date: March 17, 2009 09:25AM
Try the RodWorks, their link is to the lower left.
........... Re: Pacific Composites Grafty #15 9'
Posted by:
Ross van Enckevort
(---.lns11.adl6.internode.on.net)
Date: March 17, 2009 04:30PM
Philip,
Excel Comps got out of fly blanks years ago, no market for them. So I am not sure where you have seen this model but it definately hasn't been made for years. Regards, Ross. The RodWorks. Re: Pacific Composites Grafty #15 9'
Posted by:
Rohit Lal
(---.NSW.netspace.net.au)
Date: March 17, 2009 09:46PM
I think Fuji Australia may have outdated rod recipies on thier site Re: Pacific Composites Grafty #15 9'
Posted by:
Denis Brown
(---.nsw.bigpond.net.au)
Date: March 18, 2009 04:04AM
To be fair to Excel Composites .........its correct they have stopped manufacturing flyblanks........... but they still market Loop Flyrods & Blanks.
nice blanks , those loop blanks...................don't recollect however if they have a #15. Sorry, only registered users may post in this forum.
|