SPONSORS
2024 ICRBE EXPO |
EVA GRIPS DENSITY
Posted by:
ARTIE LETT
(---.pools.spcsdns.net)
Date: March 06, 2009 04:36PM
DOES ANY BODY KNOW A COMPANY MAKES A FAIRLY SOFT EVA BUTT GRIP. I HAVE ORDERED 3 TO GET THE DENSITY I WANT BUT THEY ARE ALL TO HARD ( FROM MUDHOLE , JANN'S AND TACKLE SUPPLY). I GUESS WHAT I,M LOOKING FOR IS A MEDIUM DENSITY GRIP. WHAT SUPPLIERS OR MANUFACTURES WOULD BE A GREAT HELP Re: EVA GRIPS DENSITY
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: March 06, 2009 04:55PM
MAke one out of craft foam, that's a ssoft as it gets. I'm working on a decorative GRip right now with that as the matieral. Re: EVA GRIPS DENSITY
Posted by:
Tom Kirkman
(Moderator)
Date: March 06, 2009 05:18PM
I can't guess as to why you want the softer grip, but will mention that the firmer ones tend to be more ergonomically correct and also much more durable over the long haul.
But as I said, if you have a particular need for a softer grip, I certainly understand. You'll just have to contact some suppliers and ask. ........... Re: EVA GRIPS DENSITY
Posted by:
Michael Danek
(---.chi.dsl-w.verizon.net)
Date: March 06, 2009 05:27PM
"In the old days," like about 30 years ago, EVA foam grips were very bad for deterioration in the sunlight, or ozone, or something, so in spite of really liking their feel, I've steered away from them. Are they now much better for this? If I make a rod with EVA will it still be good 25 years from now? On some old (cheap) rods, the grips just seemed to go away. Re: EVA GRIPS DENSITY
Posted by:
Robert Russell
(---.cable.mindspring.com)
Date: March 06, 2009 10:34PM
Check out the EVA from the custom builder handles at Mudhole. I have some and it is noticeably softer than standard EVA. Re: EVA GRIPS DENSITY
Posted by:
Scott Sheets
(---.org)
Date: March 07, 2009 11:41AM
You could also consider trying some Hypalon available from Mudhole. I have it on one rod I built about five years ago. It is much softer than the EVA I have been getting....I don't like it.....but it is softter. Scott Sheets www.smsrods.com Sorry, only registered users may post in this forum.
|