SPONSORS
2024 ICRBE EXPO |
another way to keep guides in place
Posted by:
woody osborne
(---.dhcp.embarqhsd.net)
Date: March 02, 2009 12:41PM
i had some soft foam earplugs(HOWARD LEIGHT brand). i cut a slab from one with scissors poked a SMALL hole in it and ran it down the blank. it has worked well so far- haven't gotten down to the tip of the rod yet for the smaller guides. the foam will give and move but keeps the guide roughly where i want it to be. Re: another way to keep guides in place
Posted by:
bill boettcher
(---.150.popsite.net)
Date: March 02, 2009 02:18PM
Check out the photo page. There is a way to hold them with rubber bands. Bill - willierods.com Re: another way to keep guides in place
Posted by:
matthew jacobs
(216.96.37.---)
Date: March 02, 2009 03:46PM
I use just regular old hot glue sticks. Heat up the foot, wipe it accross the stick and place. Even if you need to adjust the guide after its wrapped it seems to let me do it thus far. Re: another way to keep guides in place
Posted by:
Capt Neil Faulkner
(---.dyn.optonline.net)
Date: March 03, 2009 10:28PM
Hi,
I use the surgical tubing that comes in different sizes and colors. I cut the tubing into rings of about an eight inch, then slide them down the blank. I purchase these bags of tubing from a tackle shop or distributor. Capt Neil Faulkner Sorry, only registered users may post in this forum.
|