SPONSORS
2024 ICRBE EXPO |
renzetti lathe
Posted by:
brandon edwards
(---.hsd1.va.comcast.net)
Date: February 24, 2009 12:20PM
would like to get a lathe soon, is the renzetti worth the money? Is there a better bang for my buck out there? Re: renzetti lathe
Posted by:
Tom Kirkman
(Moderator)
Date: February 24, 2009 12:44PM
Yes, it's worth the money. Very much worth it.
Several good units, all good value for the money, are available. But the Renzetti and perhaps the Custom Power Wrap, are the most sophisticated machines. ............... Re: renzetti lathe
Posted by:
John Britt
(---.97-97.tampabay.res.rr.com)
Date: February 24, 2009 01:02PM
I spoke with Andy for a considerable time Sunday at the show and the one thing that I kept mentioning is durability mine is over 20 years old and aside from a couple of O rings and an upgrade on the thread carriage it is still going strong,best part I could sell it tomorrow for a good price, with what I could get for the sale I figure my investment is about $1.00 per month max not a bad investment
John Re: renzetti lathe
Posted by:
Sean Endres
(---.cpe.metrocast.net)
Date: February 24, 2009 01:15PM
Yes, I agree with what Tom posted. Sean Endres North East Rod Builders New London, CT Re: renzetti lathe
Posted by:
Allen Madsen
(---.176.202.162.ptr.us.xo.net)
Date: February 24, 2009 01:52PM
I thought long and hard before I bought mine and I have never regreted it, I did buy a couple of extra rod supports and a bed extension but you can get those items at any time.
Allen Madsen San Jose, CA Re: renzetti lathe
Posted by:
Lou Wasmund
(---.sd.sd.cox.net)
Date: February 24, 2009 01:56PM
I like mine....with the exception of the motor going out in the 1st 7months and renzetti not replying to emails. It is a good machine. Re: renzetti lathe
Posted by:
ridge orjalesa
(---.cfl.res.rr.com)
Date: February 24, 2009 04:36PM
what's a custom power wrap?
where can you get it? is it the same as the poac bay machine? thanks. Re: renzetti lathe
Posted by:
J.B. Hunt
(---.pool.dsl.logantele.com)
Date: February 24, 2009 04:45PM
Ridge; You can check out both of them . They are both Sponsors listed on the left side of this page. Re: renzetti lathe
Posted by:
Tom Kirkman
(Moderator)
Date: February 24, 2009 05:58PM
Custom Power Wrap is sold by Angler's Workshop. It's similar but more robust and feature oriented than the Pac Bay unit.
............... Sorry, only registered users may post in this forum.
|