SPONSORS
2024 ICRBE EXPO |
Article on RodMaker Mag about different spiral wraps
Posted by:
Max Klee
(---.netcologne.de)
Date: February 24, 2009 11:42AM
Hello everybody,
my name is Max. I´m from Germany and this is my first post in this forum. I´m interested in an article about different spiral wrap transition methods, wich was published in RodMaker Magazine Volume 6 #5 Sep/Oct '03. Unfortunetaly I can´t backorder any issues from Germany :( Would somebody please be so kind to post that article for me or scan it and email it to me? I hope I´m not asking for something illegal. If so, I ask the moderater to delete this request. Just for info, I´m not to tight to invest 8$ in a mag. The problem is that they don´t ship it to europe. Rodbuilding is not very popular here, so it´s always diffecult to get material and especially profound knowlege. Sorry for my bad english and I hope everybody understands what I wanted to say. Bye Max Re: Article on RodMaker Mag about different spiral wraps
Posted by:
Tom Kirkman
(Moderator)
Date: February 24, 2009 11:44AM
You have a distributor for RodMaker in Germany - Timo Keil. He has some back issues.
timo@keil-rodbuilding.de ............... Re: Article on RodMaker Mag about different spiral wraps
Posted by:
Max Klee
(---.netcologne.de)
Date: February 24, 2009 12:14PM
Thanks Tom,
I just gave him a call. Unfortunetaly he only has back issues from last year. He said for his clients that have a RodMaker subscibtion he would back order older issues. But not for me, since I´m not his client. He was very straight and said that ordering that issue for me is financially not interesting for him. Very nice! Max Re: Article on RodMaker Mag about different spiral wraps
Posted by:
Tom Kirkman
(Moderator)
Date: February 24, 2009 12:45PM
Well, it would cost him about $45 U.S. to get that single issue for you so unless you were a regular customer I can understand his position.
............... Re: Article on RodMaker Mag about different spiral wraps
Posted by:
bill boettcher
(---.mis.prserv.net)
Date: February 24, 2009 01:01PM
Check the Trade section of the Buy Sell page. Some back issues for trade ?? In the black bar above. Bill - willierods.com Re: Article on RodMaker Mag about different spiral wraps
Posted by:
bill boettcher
(---.248.65.97.Dial1.Weehawken1.Level3.net)
Date: February 24, 2009 05:11PM
Max:
Did you talk to Raymond Adams ?He's a good guy. I am sure if he had some of those issues you could make a deal. Bill - willierods.com Re: Article on RodMaker Mag about different spiral wraps
Posted by:
Marty Martin
(---.gsp.bellsouth.net)
Date: March 02, 2009 03:48PM
Max,
I sent you an email, but I notice from your post you may be having trouble getting info on how to spiral wrap. Have you gotten enough info to know how to do the spiral wrap yet? Sorry, only registered users may post in this forum.
|