I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Apologies
Posted by: Michael Ortega (---.va.neustar.com)
Date: February 23, 2009 11:18AM

My apologies to Bobby Feasel. You wont know me by name but I stopped by your booth Saturday and asked for a demo of splitting a micro tip top. I got caught up talking to vedors and buying products and my plans had me leaving the expo @ 12:00pm on Saturday, I totally forgot to stop back by your booth for the demo. I hope I didnt waste too much of your time getting all the parts/tools together.

My apologies,

-Mike

Options: ReplyQuote
Re: Apologies
Posted by: Steve Broadwell (66.0.6.---)
Date: February 23, 2009 01:01PM

Well, Mike you missed a good demo! He did it for me Sunday afternoon. It's so much easier than I thought it would be.

Options: ReplyQuote
Re: Apologies
Posted by: Bobby Feazel (---.55.155.207.dynamic.ip.windstream.net)
Date: February 23, 2009 07:21PM

Michael

No apologies needed. Contact me if you still need help and I'll work you thru it. Sorry you missed it.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster