I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

GSO Airport Shuttle
Posted by: Tom Kirkman (Moderator)
Date: February 05, 2009 10:19AM

It is possible to ride one of the PART shuttles from the airport to their main hub located about a mile south of the airport. The shuttle is free.

From there, for a paltry $2 you can ride the PART bus about 8 miles to downtown High Point, departing at the bus station which is located 2 blocks from the Radisson and Showplace.

Here is the information that the regional director of PART sent me:

Upon your arrival in Greensboro, you will board a PART airport shuttle service that leaves from the airport outside of the lower baggage claim level. Although the shuttle does run on regularly scheduled times you will still want to call our PART Hub 336-883-7278 if you’re departing from the airport and request a pick up. Please keep in mind that our buses are black and we are separate from the airport’s PTIA shuttle. There is no charge to ride the airport shuttle service because it is complimentary.

Once on the shuttle, you will be taken to our regional hub located off HWY 68. You will need to get off of this bus and board a PART Express High Point bus to get to the downtown High Point bus terminal.

PART’s fare is $2 OW if you are a general public rider or $1 if you are a student, elderly or disabled. Also, keep in mind that both of PART’s above-mentioned services run Monday through Friday only.

....................



Edited 1 time(s). Last edit at 02/05/2009 10:41AM by Tom Kirkman.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster