SPONSORS
2024 ICRBE EXPO |
Rodmaker Volume 4, Issue 4
Posted by:
Timothy M ONeill
(---.albyny.east.verizon.net)
Date: January 29, 2009 09:32PM
Is there anyway to purchase this back issue of Rodmaker? I am slightly preoccupied by the idea of making good over-sleeve ferrules and would like a copy of just that issue,
Thank you Tim Re: Rodmaker Volume 4, Issue 4
Posted by:
Tom Kirkman
(Moderator)
Date: January 29, 2009 09:57PM
Only on CD at this point.
I'll take a look tomorrow and see if I can find any extras of that single issue lying around. ........... Re: Rodmaker Volume 4, Issue 4
Posted by:
Tony Politi
(---.dyn.optonline.net)
Date: January 30, 2009 09:59AM
Tom, if you happen to find a second copy, I seem to have misplaced that one. I' remember reading it when I got it, but it's AWOL after many moves.
Tony Re: Rodmaker Volume 4, Issue 4
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: January 30, 2009 07:10PM
Tom,
Me too, if ya find a couple. I'll pick one up from you at the expo. Bill in WV Re: Rodmaker Volume 4, Issue 4
Posted by:
Tom Kirkman
(Moderator)
Date: January 30, 2009 08:42PM
If I were to find any, it'd just be 1 or 2.
........... Re: Rodmaker Volume 4, Issue 4
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: January 30, 2009 09:29PM
The entire Volume 4 is one of my favorites. GET THE CD guys!
Several articles by Rich Forhan Guide foot Prep Mermaid Weave Pattern Turning Reelseat Inserts Making Multi-Piece Rods Rod Repair Spigot Ferrules Each issue also has the "Bamboo Corner" section. Raymond Adams Eventually, all things merge, and a river runs through it.. Sorry, only registered users may post in this forum.
|