SPONSORS
2024 ICRBE EXPO |
I need a thread recomendation
Posted by:
David Page
(---.193.117.75.dynamic.ip.windstream.net)
Date: January 23, 2009 04:27PM
I'm building a 3SW76MLF St Croix for a guy and I guess my imagination doesn't reach far enough to come up with a thread color that will look good on this blank. It's a brown color. He and I talked originally about a Royal blue with some silver trim but now he's thinking that it won't look so good on that blank and I'm not sure it will either. Maybe a darker blue but that particular blue. What have you all that have built on an SC3 blank used in the past that looked good? He wants something that will contrast with the blank rather match up perfectly and not black. I'll use it if I have but I would rather not. David Page E-town, KY. Edited 1 time(s). Last edit at 01/23/2009 04:33PM by David Page. Re: I need a thread recomendation
Posted by:
Scott Kleppe
(---.218.43.66.dyn.southslope.net)
Date: January 23, 2009 05:15PM
Green or burgandy or a dark red with gold trim. SK Custom Rods American Tackle Pro Staff Fish now, cause you'll be dead for a long time. Re: I need a thread recomendation
Posted by:
John Kepka
(---.dsl.stlsmo.swbell.net)
Date: January 23, 2009 05:21PM
Gold metallic--several different shades or even a bronze metallic. Re: I need a thread recomendation
Posted by:
Mark Pearson
(---.apacn.com)
Date: January 23, 2009 05:53PM
Dark Green wraps with Gold Metallic trim bands, Tan inlays on Chestnut guide wraps with Metallic Brown trim bands Re: I need a thread recomendation
Posted by:
Joshua Turner
(---.dhcp.embarqhsd.net)
Date: January 23, 2009 07:22PM
i like a red on that color blank, no CP Re: I need a thread recomendation
Posted by:
mike harris
(---.unknown.charter.com)
Date: January 23, 2009 08:09PM
Bright orange with metallic gold trim looks great on that color blank. Re: I need a thread recomendation
Posted by:
Frank J Harvey
(---.cell1net.net)
Date: January 23, 2009 09:34PM
I think a light blue combination would look awesome on brown blank. Re: I need a thread recomendation
Posted by:
Joe McKishen
(---.cmdnnj.fios.verizon.net)
Date: January 24, 2009 12:43AM
I've done a few of those blanks with HT metallic pewter trimmed in gold, a few in red with no cp, left to darken a bit, and a few with black or dark brown wraps.
I personally like the look of the HT metallics on those blanks, copper, green, bronze, or even black will also work, then trimmed in gold, silver, yellow, white, etc. Copper or burgundy with a gold trim band both come out great too. Re: I need a thread recomendation
Posted by:
Todd Wymer
(---.mia.bellsouth.net)
Date: January 24, 2009 07:30PM
how about a candy apple red with no CP and a bronze, copper or gold metalic trim. Sorry, only registered users may post in this forum.
|