SPONSORS
2024 ICRBE EXPO |
need a good walleye blank
Posted by:
Jon Sanders
(209.106.216.---)
Date: January 22, 2009 09:18AM
I've got a guy that's wanting me to build him a 6' mh walleye rod. He's wanting something that has some play in the tip, but still has some good backbone. He's also wanting to keep the price reasonably low. Any suggestions would be great. ~Jon There is certainly something in angling that tends to produce a serenity of the mind Re: need a good walleye blank
Posted by:
Tom Kirkman
(Moderator)
Date: January 22, 2009 10:17AM
Any of the 2-power spinbass or spinjig blanks make very nice walleye rods. These are usually a little more stout in the butt section than blanks specifically marketed for walleye fishing, however.
................ Re: need a good walleye blank
Posted by:
Karry Batson
(---.olympus.net)
Date: January 22, 2009 12:12PM
ISB722
Rainshadow Spin Bass Component Part Number Part Description Rod Blank Model # ISB722-M 6' 1pc Med Spin Bass - Matte Clear Butt cap: SBC20B Black Butt Cap 19.8mm ID Reel Seat: GSTG16C-TC Textured Gray Graphite Spin Reel Seat w/Cushion-Real Light TICH Reel Seat Shim: SHIM/16/SPIN Proof Board .590" OD 3.70" Length Fore Grip: FG25A-350 2 1/2" Cork Fore Grip .350" ID "A" Grade Cork Rear Grip: RG7A-345 7" Cork Rear Grip 'A' Grade Cork Winding Check: LTCWC385 Lt TitCar Pltd Winding Check .385" ID Hookeeper: TCHKS Small TiCH Hook Keeper Tip Top LTCPCT06R05.0 Light TiCH Plated 'P' Top 06 Ring TiCH 5.0 Tube Guides (see below for size and quantity) LTCVSCG Light TiCH Plated Single Foot V Frame TiCH Ring Guide order from the tip top Guide Guide Placement - In inches from the tip top 1st LTCVSCG06 4.5" 2nd LTCVSCG07 9.75" 3rd LTCVSCG08 15.75" 4th LTCVSCG10 22.5" 5th LTCVSCG16 31" 6th LTCVSCG30 40" ISB723 Rainshadow Spin Bass Component Part Number Part Description Rod Blank Model # ISB723-M 6' 1pc Med/HVY Spin Bass - Matte Clear Butt cap: SBC20B Black Butt Cap 19.8mm ID Reel Seat: GSTG17C-TC Textured Gray Graphite Spin Reel Seat w/Cushion-Real Light TICH Reel Seat Shim: SHIM/17/SPIN Proof Board .660" OD 4.05" Length Fore Grip: FG25A-350 2 1/2" Cork Fore Grip .350" ID "A" Grade Cork Rear Grip: RG7A-345 7" Cork Rear Grip 'A' Grade Cork Winding Check: LTCWC425 Lt TitCar Pltd Winding Check .425" ID Hookeeper: TCHKS Small TiCH Hook Keeper Tip Top LTCPCT06R05.5 Light TiCH Plated 'P' Top 06 Ring TiCH 5.5 Tube Guides (see below for size and quantity) LTCVSCG Light TiCH Plated Single Foot V Frame TiCH Ring Guide order from the tip top Guide Guide Placement - In inches from the tip top 1st LTCVSCG06 4.5" 2nd LTCVSCG07 9.75" 3rd LTCVSCG08 15.75" 4th LTCVSCG10 22.5" 5th LTCVSCG16 31" 6th LTCVSCG25 40" Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Re: need a good walleye blank
Posted by:
Mark Pearson
(---.apacn.com)
Date: January 22, 2009 01:24PM
The St. Croix SCIII series has excelent blanks at a good price. They have a nice selection in the size you are looking for. The vendors to the left have a good selection. Re: need a good walleye blank
Posted by:
Bill Pulk-Midwest rod and reel
(---.hsd1.fl.comcast.net)
Date: January 22, 2009 01:52PM
Jon the 2 blanks Karry said to look at are nice...but if it is nice back bone you want take a look at the IC722 or the IC723...Midwest has been useing the IC721,722,723 for spinning rods for walleye fishing some time now and the customers love the rods..we stock all 3 blanks at midwest rod and reel...here is a link to them [www.midwestrodandreel.com]) Bill@midwestrodandreel.com www.midwestrodandreel.com Sorry, only registered users may post in this forum.
|