SPONSORS
2024 ICRBE EXPO |
Surf rod
Posted by:
Louis Mangano
(---.nycmny.fios.verizon.net)
Date: December 29, 2008 08:03PM
I was asked to build a 12' 3 piece surf rod for throwing 5-9 oz baits and plugs. Any suggestions on blank and componets would be appreciated. As I Build mostly boat rods I have limited knowlege on surf rods. I would prefer a composite blank.
Thanks Lou Re: Surf rod
Posted by:
Rob Hale
(---.northstate.net)
Date: December 30, 2008 10:01AM
Batson has a W-I-D-E assortment surf rod offerings. Have a look at his website and search to your heart's content! I would recommend a fast action blank if you are going to throw plugs. Re: Surf rod
Posted by:
Jeff Epling
(63.241.226.---)
Date: December 30, 2008 12:47PM
I don't know of too many 3 pc. surf blanks other than the Daiwa Ballistic series. Re: Surf rod
Posted by:
Louis Mangano
(---.nycmny.fios.verizon.net)
Date: December 30, 2008 06:45PM
Thanks for the Information I will research The info.
Thanks Lou Re: Surf rod
Posted by:
Phil Ewanicki
(---.235.78.34.Dial1.Orlando1.Level3.net)
Date: December 31, 2008 10:17AM
Purglas makes a number of three piece blanks. Re: Surf rod
Posted by:
fred marcuson
(---.hrbgpa.east.verizon.net)
Date: December 31, 2008 04:27PM
humm just wondering if you have a source for the purglas rods ??
to the best of my knowledge they have been impossible to find , only a few old stock blanks here and there Sorry, only registered users may post in this forum.
|