SPONSORS
2024 ICRBE EXPO |
New St. Croix 5S66MLF
Posted by:
Marty Martin
(---.gsp.bellsouth.net)
Date: December 28, 2008 11:09PM
Bob MacKamey at Custom Tackle hooked me up with one of these yesterday and I was just curious if anybody had used any of the new St. Croix SCV blanks and what folks thought of them. Re: New St. Croix 5S66MLF
Posted by:
Matt Davis
(---.prtel.com)
Date: December 29, 2008 07:20AM
I've used a few.
So far, of the blanks I've measured, they are faster blanks than the brown models. Very fine tip diameters. ................................... Better to have and not need than to need and not have. Re: New St. Croix 5S66MLF
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: December 29, 2008 01:51PM
Matt,
If you know, what is the tip diameter of the SC5 6'6" m-l ? I think that the brown was 4/64ths. Thanks much Roger Re: New St. Croix 5S66MLF
Posted by:
Marty Martin
(---.gsp.bellsouth.net)
Date: December 29, 2008 05:21PM
The new PDF catalogue on the St. Croix site lists it as 3.5/64s, but I have had them come in larger and smaller than the catalogue specs. Bob at Custom Tackle always checks everything to make sure my sizes match up but it looks like it will definitely be small. If you would like, I'll be happy to measure and shoot you a reply when it comes in. You're email is hidden so you might want to unhide it or shoot me an email if you would like for me to get back to you. Re: New St. Croix 5S66MLF
Posted by:
Matt Davis
(---.prtel.com)
Date: December 30, 2008 07:57AM
Roger
I do not. I'm working on 70MLF2 right now. Have not held the 66. ........................... Better to have and not need than to need and not have. Re: New St. Croix 5S66MLF
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: December 30, 2008 05:21PM
Marty,
I have unhid my e-mail. Thanks for the update. Roger Sorry, only registered users may post in this forum.
|