SPONSORS
2024 ICRBE EXPO |
Bamboo blanks
Posted by:
Brian Althouse
(---.hsd1.in.comcast.net)
Date: December 17, 2008 10:01PM
I'm looking to build a few bamboo rods, any suggestions on where to buy a blank only? Re: Bamboo blanks
Posted by:
eric zamora
(---.dsl.frs2ca.pacbell.net)
Date: December 18, 2008 02:25AM
there are actually a lot of sources for finely made DOMESTIC (united states) bamboo fly blanks. i bought one awhile ago i have yet to wrap. it's a 2/2 made to my requested taper, flamed, ferruled and hollow built for under $300 though many will hover around $400-$600. email me and i can supply a short list of sources.
eric fresno, ca. Re: Bamboo blanks
Posted by:
john timberlake
(---.triad.res.rr.com)
Date: December 18, 2008 07:08AM
if any of the sponsors cant help you try ken preston. kenprestonrods. i know he has quite a few blanks on hand Re: Bamboo blanks
Posted by:
Tom Kirkman
(Moderator)
Date: December 18, 2008 08:25AM
Boyd Rod Company, listed to the left is one possible source. They're a sponsor as well.
........... Re: Bamboo blanks
Posted by:
eric zamora
(---.dsl.frs2ca.pacbell.net)
Date: December 18, 2008 10:57AM
Oooops, my mistake. i had forgotten about Harry being a relatively new sponsor. Harry is well-known in the US bamboo maker community.
eric fresno, ca. Re: Bamboo blanks
Posted by:
bill boettcher
(---.nj-01.cvx.algx.net)
Date: December 18, 2008 11:21AM
Check this out: [rodbuilding.org] Re: Bamboo blanks
Posted by:
Joe Douglas
(---.static.vsat-systems.net)
Date: December 18, 2008 01:23PM
I have two sources for better quality imported bamboo blanks and one source for domestic made blanks. None of these are in my online catalog but I can discuss them over the phone. Joe Douglas Re: Bamboo blanks
Posted by:
Ken Preston
(---.hsd1.md.comcast.net)
Date: December 18, 2008 11:10PM
I have some hand made bamboo blanks on hand - drop me an email and let me know what you're looking for (length / pieces / taper). I may be able to help you out. If you want them ferruled as well I also have some nice REC nickel silver ferrules. Re: Bamboo blanks
Posted by:
Harry Boyd
(---.shv.bellsouth.net)
Date: December 19, 2008 07:54AM
Thanks for the nod guys, but I don't sell many blanks. Once in a great while I'll make one for a friend, but not too often. I recommend some of those mentioned above (Ken), plus Tim Zietak, Dennis Stone, Chris Carlin, and a few others.
Harry Harry Boyd Re: Bamboo blanks
Posted by:
Ken Preston
(---.hsd1.md.comcast.net)
Date: December 21, 2008 10:03AM
For anyone who went to (or heard about) the last I-CAST in Las Vegas a couple of my rod blanks were used to build rods that were on display. I've seen Tim Zietak's work - EXCELLENT. Sorry, only registered users may post in this forum.
|