SPONSORS
2024 ICRBE EXPO |
Chromaseal CP Question
Posted by:
Tom Loucks
(---.proxy.aol.com)
Date: December 17, 2008 02:42PM
Gentlemen:
I am going to purchase some Chromaseal color preserver.It sounds like a great product. My Question is , I still have some L S Supreme and some Glass Coat epoxe left that I would like to use and want to know if the Chromaseal is compatable with these two products. Thanks again for your help. Tom Re: Chromaseal CP Question
Posted by:
Greg Weaver
(---.carolina.res.rr.com)
Date: December 17, 2008 03:19PM
Any CP if left to dry completely after application will be compatible with any of the epoxy finishes. Re: Chromaseal CP Question
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: December 17, 2008 03:47PM
Yepper! Like Greg said. Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Edited 1 time(s). Last edit at 12/17/2008 03:47PM by Mike Barkley. Re: Chromaseal CP Question
Posted by:
Russ Pollack
(---.org)
Date: December 17, 2008 04:01PM
We use a rule of thumb for letting our two coats of CP dry before we apply any finish (i.e., epoxy) at all - 24hrs per coat.
It's not because it's ChromaSeal. It doesn't matter what brand it is. It doesn't even matter if you are using the same brand of CP and epoxy (i.e., Flex Coat to Flex Coat). We have found that this kind of care with the stuff we use eliminates a whole bunch of "issues" (we used to call them "problems", but I guess "issues" is the current "personal esteem"-based term) with the entire finishing process. Uncle Russ Calico Creek Rods Sorry, only registered users may post in this forum.
|