I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

micro ice rubber winding checks
Posted by: Buzz Butters (---.ripon.k12.wi.us)
Date: December 15, 2008 02:48PM

Jann's netcraft used to sell winding checks for their micro ice panfish blanks. Normally I don't use winding checks as I ream the last foregrip ring tight to the blank. But with these blanks, the hole that comes with the cork rings is bigger than the blank. I checked Jann's website and though they list winding checks they don't list the correct size. I don't have measurements in front of me but the tip top is a size 2.0. Anyone know of who might sell these winding checks?
Thanks,
Buzz

I need 2 dozen by the way.

Options: ReplyQuote
Re: micro ice rubber winding checks
Posted by: Duane Richards (---.rn.hr.cox.net)
Date: December 15, 2008 03:33PM

Another thought.....a simple rubber "O" ring at the hardware store, matched to size of course.

DR

Options: ReplyQuote
Re: micro ice rubber winding checks
Posted by: Joe Douglas (---.static.vsat-systems.net)
Date: December 15, 2008 07:01PM

Buzz, I carry these down to size 125. I think I have that many in stock.

Joe Douglas

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster