SPONSORS
2024 ICRBE EXPO |
Star rods blank id.
Posted by:
tony fialkowski
(---.nwrknj.fios.verizon.net)
Date: October 15, 2008 08:01PM
I was asked to rebuild a Star Rods model: gp 8/72 cc. Rod is 6' medium action with a 7.5 tip. I'm looking for suggestions for a replacement blank, as it will be far less time consuming to start with a new blank and build from the ground up instead of trying to resurrect this one. Looking at past posts on this subject, this might be a gator glass blank but didn't find anything with those dimensions in their lineup. Any suggestions would be greatly appreciated, Thanks
Tony Re: Star rods blank id.
Posted by:
Sean Cheaney
(---.158.33.65.cfl.res.rr.com)
Date: October 15, 2008 10:59PM
will likely be a gator glass unless its a graphite blank in which case I have no idea. Re: Star rods blank id.
Posted by:
John Britt
(---.97-97.tampabay.res.rr.com)
Date: October 16, 2008 08:39AM
Tony up to a few years ago Star used almost all Gator Glass and a couple of Ugly Stik models. Some of the blanks used were made by Gator Glass for Star rods only the blanks were not available for sale, their older kingfish rods for example, with their move offshore no way to tell where the blanks used come from
John Sorry, only registered users may post in this forum.
|