SPONSORS
2024 ICRBE EXPO |
butt grips
Posted by:
Capt alan beck
(---.dsl.crchtx.sbcglobal.net)
Date: September 04, 2008 02:20PM
I am looking for 9" to 10" butt grip. I have seen some that start out in a small diameter at the bottom and then gets fatter at the top near the reel seat. I have had some before, i got them off of @#$%& and now i can't find them anywhere. Help would be greatly appreciated.
Alan Re: butt grips
Posted by:
Anonymous User
(Moderator)
Date: September 04, 2008 04:46PM
Shouldn't be hard to find. Ask some of the regular sponsors here - most anybody should be able to get you straight taper grips in that length.
.................. Re: butt grips
Posted by:
Russ Pollack
(---.org)
Date: September 04, 2008 05:17PM
Made out of what?
I have some EVA tubes that would fit this need, and I might even have some cork, but virtually all of the sponsors to the left have them too, brand new (as opposed to my leftovers). Uncle Russ Calico Creek Rods Re: butt grips
Posted by:
Capt alan beck
(---.dsl.crchtx.sbcglobal.net)
Date: September 04, 2008 05:47PM
cork Re: butt grips
Posted by:
Capt alan beck
(---.dsl.crchtx.sbcglobal.net)
Date: September 04, 2008 06:06PM
they call them palm grips fish stick has apic in there close out on the wed site the no cg-pr 8 460 Re: butt grips
Posted by:
Tim Collins
(---.hsd1.mi.comcast.net)
Date: September 04, 2008 07:12PM
Alan, shoot me an email and see if this is what your looking for.
I just saw your last post - these are what you're looking for plus they have a butt cap. Edited 1 time(s). Last edit at 09/04/2008 07:15PM by Tim Collins. Re: butt grips
Posted by:
Karry Batson
(---.olympus.net)
Date: September 04, 2008 07:32PM
Batson Enterprises has something you may be looking for. Check out our New High Density Cork Composite/Cork grips with Palm well. These come with a tendon to fit the size 16,17 and 18 trigger seats. You will need to cut it off for spin.
HERG7.0S/.375 Rear HERG9.0S/.375 Rear HERG10.0S/.375 Rear HERG14.0S/.375 Rear HEFG2.0S/250 Fore HEFG2.5S/250 Fore HEFG3.0S/250 Fore HEFG5.0S/375 Fore Use with HDCCBC20F or HDCCBC20 Butt cap. Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Re: butt grips
Posted by:
Mud Hole Custom Tackle
(---.net.bhntampa.com)
Date: September 05, 2008 05:16PM
Mud Hole has some cork on special that may be just what you are looking for, for 10" check out:
[www.mudhole.com] for 8" look at" [www.mudhole.com] The prices are right - thats for sure! PS - Mud Hole has a semi-truck of cork coming in the next few weeks, look for some more great cork specials soon! PPS - We have gotten a few emails on that comment.........No we're not kidding, it's s semi-truck!! We're getting over a quarter million inches (21,000 feet) of cork handles! That's more cork than any other vendor/distributor (or vendors combined) sell in a year. Over a $400,000 retail value that well be sold at exceptional prices! When we say we are the worlds largest rod building supplier, we mean it! And we back it up with exceptional customer service. Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Edited 1 time(s). Last edit at 09/05/2008 05:34PM by Mud Hole Custom Tackle. Re: butt grips
Posted by:
Capt alan beck
(---.dsl.crchtx.sbcglobal.net)
Date: September 06, 2008 03:29AM
thank eveybody for help with this Sorry, only registered users may post in this forum.
|