I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

LS Supreme over MinWax Poly
Posted by: Mike Douglass (---.an3.sea18.da.uu.net)
Date: August 25, 2008 10:40PM

I recently used a very light coat of the MinWax Polyurethane semi-gloss to seal a feather inlay and was wondering if I can now finish with LS Supreme? Perma Glos? Threadmaster?

Thanks, Mike

Options: ReplyQuote
Re: LS Supreme over MinWax Poly
Posted by: Anonymous User (Moderator)
Date: August 26, 2008 08:50AM

Any epoxy should be okay. PermaGloss might eat into the poly. Not sure, but it does contain a solvent whereas the epoxies do not.

.................

Options: ReplyQuote
Re: LS Supreme over MinWax Poly
Posted by: Mike Douglass (---.an4.sea18.da.uu.net)
Date: August 26, 2008 08:42PM

Thanks Tom,
I'll go with the epoxy.

Mike

Options: ReplyQuote
Re: LS Supreme over MinWax Poly
Posted by: Russ Pollack (---.airband.net)
Date: August 27, 2008 12:01AM

Another approach is to first coat the feathers with TM's ChromaSeal and then just use the LS over that.

Uncle Russ
Calico Creek Rods

Options: ReplyQuote
Re: LS Supreme over MinWax Poly
Posted by: Walt Natzke (12.22.21.---)
Date: August 27, 2008 01:03AM

I second the Chromaseal approach. In my opinion, it keeps the color of the feathers MUCH brighter than any other finish.

Walt

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster