SPONSORS
2024 ICRBE EXPO |
Diamondite/Threadmaster
Posted by:
Dave Damon
(---.dsl.renocs.sbcglobal.net)
Date: August 24, 2008 07:49PM
I was wondering if anyone has used Threadmaster over the top of Swifty's Diamondite.I used to use Threadmaster exclusively until my wife complained so much about the smell. Now that my shop is finished, I was planning on going back to using Threadmaster. I have no complaints about Diamondite, I just prefer Threadmaster. I have a spey rod that had the wraps done in Diamondite for the first coat and wanted to finish up with epoxy. I know Diamondite can be used over epoxy as long as it had cured.
Thanks, Dave Re: Diamondite/Threadmaster
Posted by:
Mark Blabaum
(12.213.112.---)
Date: August 24, 2008 07:51PM
Dave, I have used Threadmaster over Diamondite with out any problems. I like to use threadmaster to seal the thread and then finish with a final coat of Threadmaster. Re: Diamondite/Threadmaster
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: August 24, 2008 08:48PM
Mark, Did you mean what you wrote or are the diesel fumes gettin to ya? Freddwhy (Rapt-Ryte) Re: Diamondite/Threadmaster
Posted by:
Dave Damon
(---.dsl.renocs.sbcglobal.net)
Date: August 25, 2008 02:00AM
Thanks, Mark. I'll give it a try.
Dave Re: Diamondite/Threadmaster
Posted by:
Mark Blabaum
(---.dsl.mhtc.net)
Date: August 25, 2008 11:52AM
Fred, I should read what I write before I hit the post button. I meant to say I seal with diamondite and then finish with threadmaster. Sorry
Fred I think you're right the old 6.0L fumes are getting the best of me. Sorry, only registered users may post in this forum.
|